1. Large current can be drawn from them
2. Are lighter
3. Require little attention
johnmulu answered the question on February 7, 2017 at 07:34
-
A car battery requires topping up with distilled water occasionally. Explain why this is necessary and why distilled water is used
(Solved)
A car battery requires topping up with distilled water occasionally. Explain why this is necessary and why distilled water is used
Date posted:
February 7, 2017
.
Answers (1)
-
A current of 0.5 A flows in a circuit. Determine the quantity of charge that crosses a point in 4 minutes
(Solved)
A current of 0.5 A flows in a circuit. Determine the quantity of charge that crosses a point in 4 minutes
Date posted:
February 7, 2017
.
Answers (1)
-
State two advantages of an alkaline battery over a lead acid battery
(Solved)
State two advantages of an alkaline battery over a lead acid battery.
Date posted:
February 7, 2017
.
Answers (1)
-
It is observed that when a charged body is brought near the cap of a positively charged electroscope, the divergence of leaf increases
(Solved)
It is observed that when a charged body is brought near the cap of a positively charged electroscope, the divergence of leaf increases. State the type of charge on the body
Date posted:
February 7, 2017
.
Answers (1)
-
State two uses of a charged gold leaf electroscope
(Solved)
State two uses of a charged gold leaf electroscope.
Date posted:
February 7, 2017
.
Answers (1)
-
A positively charged sphere is suspended by an insulating thread. A negatively charged conductor is suspended near it
(Solved)
A positively charged sphere is suspended by an insulating thread. A negatively charged conductor is suspended near it. The conductor is first attracted, after touching the sphere it is repelled. Explain this observation
Date posted:
February 7, 2017
.
Answers (1)
-
A conductor is slowly brought near the cap of a positively charged electroscope. The leaf first collapses and then diverges
(Solved)
A conductor is slowly brought near the cap of a positively charged electroscope. The leaf first collapses and then diverges. State the charge on the conductor
Date posted:
February 7, 2017
.
Answers (1)
-
A leaf electroscope A is charged and placed on the bench. Another uncharged leaf electroscope B is placed on the same bench and moved close to A until the caps touch
(Solved)
A leaf electroscope A is charged and placed on the bench. Another uncharged leaf electroscope B is placed on the same bench and moved close to A until the caps touch. State and explain what is observed on the leaves of A and B.
Date posted:
February 7, 2017
.
Answers (1)
-
A positively charged rod is brought near the cap of a leaf electroscope. The cap is the earthed momentarily by touching with the finger
(Solved)
A positively charged rod is brought near the cap of a leaf electroscope. The cap is the earthed momentarily by touching with the finger. Finally the rod is withdrawn. The electroscope is found to be negatively charged. Explain how this charge is acquired.
Date posted:
February 7, 2017
.
Answers (1)
-
A highly negatively charged rod is gradually brought close to the cap of a positively charged electroscope
(Solved)
A highly negatively charged rod is gradually brought close to the cap of a positively charged electroscope. It is observed that the leaf collapses initially and then diverges. Explain the observation.
Date posted:
February 7, 2017
.
Answers (1)
-
State the law of electrostatic charges
(Solved)
State the law of electrostatic charges
Date posted:
February 7, 2017
.
Answers (1)
-
You are provided with a charged electroscope, an insulator and a conductor. Describe how you would use these apparatus to distinguish the insulator from the conductor
(Solved)
You are provided with a charged electroscope, an insulator and a conductor. Describe how you would use these apparatus to distinguish the insulator from the conductor.
Date posted:
February 7, 2017
.
Answers (1)
-
State the reason why a convex mirror is preferred over a plane mirror for use as driving mirror
(Solved)
State the reason why a convex mirror is preferred over a plane mirror for use as driving mirror.
Date posted:
February 7, 2017
.
Answers (1)
-
Explain why the images formed in a pin hole camera gets blurred when the hole is enlarged
(Solved)
Explain why the images formed in a pin hole camera gets blurred when the hole is enlarged
Date posted:
February 7, 2017
.
Answers (1)
-
State the number of images formed when an object is between two plane mirror placed in parallel
(Solved)
State the reason why when a ray of right strikes a mirror at 90o, the reflected ray travels along the a same path as the incident ray
Date posted:
February 7, 2017
.
Answers (1)
-
State the number of images formed when an object is between two plane mirror placed in parallel
(Solved)
State the number of images formed when an object is between two plane mirror placed in parallel
Date posted:
February 7, 2017
.
Answers (1)
-
In certain pinhole camera, the screen is 10cm from the pinhole. When the camera is placed 6 m away from a tree, a sharp image of the tree 16 cm high
(Solved)
In certain pinhole camera, the screen is 10cm from the pinhole. When the camera is placed 6 m away from a tree, a sharp image of the tree 16 cm high is formed on the screen. Determine the height of the tree
Date posted:
February 7, 2017
.
Answers (1)
-
What is meant by virtual image?
(Solved)
What is meant by virtual image?
Date posted:
February 7, 2017
.
Answers (1)
-
A vertical object placed on a bench is observed to have three shadows of different sharpness, in different directions
(Solved)
A vertical object placed on a bench is observed to have three shadows of different sharpness, in different directions. Explain this observation
Date posted:
February 7, 2017
.
Answers (1)
-
What property of light is suggested by the formation of shadows?
(Solved)
What property of light is suggested by the formation of shadows?
Date posted:
February 7, 2017
.
Answers (1)