Place 20cm³ of 0.2M copper(II)sulphate (VI) solution into a calorimeter/50cm³ of plastic beaker wrapped in cotton wool/tissue paper. Record its temperature at time T= 0. Stir the...

Place 20cm³ of 0.2M copper(II)sulphate (VI) solution into a calorimeter/50cm³ of plastic beaker wrapped in cotton wool/tissue paper.
Record its temperature at time T= 0.
Stir the solution with the thermometer carefully and continue recording the temperature after every 30 seconds .
Place all the (1.5g) Zinc powder provided.
Stir the solution with the thermometer carefully and continue recording the temperature after every 30 seconds for five minutes.
Determine the highest temperature change to the nearest 0.5^oC


Answer the questions below

---

---

Wilfykil answered the question on February 20, 2019 at 05:31

Exams With Marking Schemes

• Grade 1
• Grade 2
• Grade 3
• Grade 4
• Grade 5
• Grade 6
• Grade 7
• Grade 8
• Grade 9
• PP1
• PP2
• Playgroup
• Form 1
• Form 2
• Form 3
• Form 4

Related Questions

---

• Determine the specific heat capacity of a solution of a solution mixture of 50.0cm³ of 2M potassium hydroxide neutralizing 50.0cm³ of 2M nitric(V) acid if a 13.25^oC... (Solved)
  

  Determine the specific heat capacity of a solution of a solution mixture of
  50.0cm³ of 2M potassium hydroxide neutralizing 50.0cm³ of 2M nitric(V)
  acid if a 13.25^oC rise in temperature is recorded.(1mole of potassium hydroxide produce 55.4kJ of energy)

  Date posted: February 19, 2019 .    Answers (1)

• The molar enthalpy of neutralization was experimentary shown to be 51.5kJ per mole of 0.5M hydrochloric acid and 0.5M sodium hydroxide. If the volume of... (Solved)
  

  The molar enthalpy of neutralization was experimentary shown to be 51.5kJ per mole of 0.5M hydrochloric acid and 0.5M sodium hydroxide. If the volume of sodium hydroxide was 20cm³. what was the volume of hydrochloric acid used if the reaction produced a 5.0^oC rise in temperature?

  Date posted: February 19, 2019 .    Answers (1)

• Place 20cm³ of 0.2M copper(II)sulphate(VI)solution into a 50cm³ plastic beaker/calorimeter. Determine and record the temperature of the solution T1.Put all the Zinc powder provided into... (Solved)
  

  Place 20cm³ of 0.2M copper(II)sulphate(VI)solution into a 50cm³ plastic beaker/calorimeter. Determine and record the temperature of the solution T1.Put all the Zinc powder provided into the plastic beaker. Stir the mixture using the thermometer. Determine and record the highest temperature change to the nearest
  0.5^oC- T2 . Repeat the experiment to complete the table. Answer the questions below

  Date posted: February 19, 2019 .    Answers (1)

• 1.0 g of carbon burn in excess air to raise the temperature of 400g of water by 18^oC. Determine the molar heat of combustion and... (Solved)
  

  1.0 g of carbon burn in excess air to raise the temperature of 400g of water by 18^oC. Determine the molar heat of combustion and hence the heating value of carbon(C-12.0,).

  Date posted: February 19, 2019 .    Answers (1)

• Explain the methods used to reduce pollution from common fuels (Solved)
  

  Explain the methods used to reduce pollution from common fuels

  Date posted: February 19, 2019 .    Answers (1)

• Explain other factors used to determine the choice of fuel for domestic and industrial use (Solved)
  

  Explain other factors used to determine the choice of fuel for domestic and industrial use

  Date posted: February 19, 2019 .    Answers (1)

• Define Standard enthalpy/heat of reaction (Solved)
  

  Define Standard enthalpy/heat of reaction

  Date posted: February 19, 2019 .    Answers (1)

• Calculate the molar heat of vaporization of water.(H= 1.0,O= 16.O) (Solved)
  

  Calculate the molar heat of vaporization of water.(H= 1.0,O= 16.O)
  

  Date posted: February 19, 2019 .    Answers (1)

• Define energy and state the two types of energy (Solved)
  

  Define energy and state the two types of energy

  Date posted: February 19, 2019 .    Answers (1)

• Study the flow chart below and use it to answer the questions that follow (Solved)
  

  Study the flow chart below and use it to answer the questions that follow
  

  Date posted: February 19, 2019 .    Answers (1)

• State and explain the observations made when a filter paper dipped in Lead(II) ethanoate /Lead (II) nitrate(V) solution is put in a gas jar containing... (Solved)
  

  State and explain the observations made when a filter paper dipped in Lead(II) ethanoate /Lead (II) nitrate(V) solution is put in a gas jar containing hydrogen sulphide gas

  Date posted: February 19, 2019 .    Answers (1)

• Fill a burette wuth 0.1M dilute sulphuric(VI)acid. Pipette 20.0cm³ of 0.1M sodium hydroxide solution into a 250cm³ conical flask. Add three drops of phenolphthalein indicator.... (Solved)
  

  Fill a burette wuth 0.1M dilute sulphuric(VI)acid. Pipette 20.0cm³ of 0.1M sodium hydroxide solution into a 250cm³ conical flask. Add three drops of phenolphthalein indicator. Titrate the acid to get a permanent colour change.Repeat with 0.1M potassium hydroxide solution in place of 0.1M sodium hydroxide solution.
  State and explain the observations made.

  Date posted: February 19, 2019 .    Answers (1)

• Place 5cm3 of 0.2M dilute sulphuric(VI)acid into four separate clean boiling tubes. Add about 0.1g of copper(II)oxide to one boiling tube. Stir. Repeat by adding Zinc... (Solved)
  

  Place 5cm3 of 0.2M dilute sulphuric(VI)acid into four separate clean boiling tubes. Add about 0.1g of copper(II)oxide to one boiling tube. Stir.
  Repeat by adding Zinc oxide, calcium carbonate and Sodium (II)Oxide in place of the Copper(II)Oxide
  State and explain the observations made.

  Date posted: February 19, 2019 .    Answers (1)

• Put about 2cm3 of Concentrated sulphuric (VI) acid into two separate boiling tubes. Place a thin moist/damp/wet filter paper dipped in acidified potassium dichromate (VI)solution... (Solved)
  

  Put about 2cm3 of Concentrated sulphuric (VI) acid into two separate boiling tubes. Place a thin moist/damp/wet filter paper dipped in acidified potassium dichromate (VI)solution on the mouth of the boiling tube.
  Put about 0.5g of powdered charcoal and sulphur powder to each boiling tube separately, Warm. State and explain the observations made.

  Date posted: February 19, 2019 .    Answers (1)

• Put about 2 cm³ of Concentrated sulphuric (VI) acid into three separate boiling tubes. Place a thin moist/damp/wet filter paper dipped in acidified potassium dichromate (VI)solution... (Solved)
  

  Put about 2 cm³ of Concentrated sulphuric (VI) acid into three separate boiling tubes. Place a thin moist/damp/wet filter paper dipped in acidified potassium dichromate (VI)solution on the mouth of the boiling tube. Put about 0.5g of Copper turnings, Zinc granule and Iron filings to each boiling tube separately. State and explain the observations made.

  Date posted: February 19, 2019 .    Answers (1)

• State the properties of Concentrated sulphuric(VI)acid (Solved)
  

  State the properties of Concentrated sulphuric(VI)acid

  Date posted: February 19, 2019 .    Answers (1)

• Dry litmus papers and wet/damp/moist litmus papers were put in a gas jar containing sulphur(IV) oxide gas. State and explain the observations made (Solved)
  

  Dry litmus papers and wet/damp/moist litmus papers were put in a gas jar containing sulphur(IV) oxide gas. State and explain the observations made

  Date posted: February 19, 2019 .    Answers (1)

• Write the equations for the reaction for the formation of sulphur (IV)oxide using two methods (Solved)
  

  Write the equations for the reaction for the formation of sulphur (IV)oxide using two methods

  Date posted: February 19, 2019 .    Answers (1)

• State the main compounds of sulphur (Solved)
  

  State the main compounds of sulphur

  Date posted: February 19, 2019 .    Answers (1)

• Calculate the volume of sulphur (IV)oxide produced when 0.4 g of sulphur is completely burnt in excess air.(S = 32.0 ,I mole of a gas... (Solved)
  

  Calculate the volume of sulphur (IV)oxide produced when 0.4 g of sulphur is completely burnt in excess air.(S = 32.0 ,I mole of a gas occupies 24 dm³ at room temperature)

  Date posted: February 19, 2019 .    Answers (1)