-
Two immiscible liquids are poured in a container to the levels shown in the diagram below.
(Solved)
Two immiscible liquids are poured in a container to the levels shown in the diagram below.
If the densities of the liquids A and B are 1g/cm3 and 0.8g/cm3 respectively, find the pressure
acting upon solid C at the bottom of the container due to the liquids
Date posted:
April 2, 2019
.
Answers (1)
-
Figure below shows a measuring cylinder of height 30cm filled to a height of 20cm with water and the rest occupied by kerosene.
(Solved)
Figure below shows a measuring cylinder of height 30cm filled to a height of 20cm with water and the rest occupied by kerosene.
Given that density of water = 1000Kgm-3, density of kerosene = 800Kgm-3 and atmospheric pressure = 1.03x105 pascals, determine the pressure acting on the base of the container.
Date posted:
April 2, 2019
.
Answers (1)
-
The barometric height at sea level is 76cm of mercury while at a point on a highland it is 74cm of mercury. What is the...
(Solved)
The barometric height at sea level is 76cm of mercury while at a point on a highland it is 74cm of mercury. What is the altitude of the point? (Take g = 10m/s2 , density of mercury =
13600kg/m3 and density of air as 1.25kg/m3)
Date posted:
April 2, 2019
.
Answers (1)
-
The figure below shows to light pith balls arranged as shown.
(Solved)
The figure below shows to light pith balls arranged as shown.
State what is observed when air is blown on the outer sides of the pith balls.
Date posted:
April 2, 2019
.
Answers (1)
-
What is the density of alcohol?
(Solved)
What is the density of alcohol?
Date posted:
April 2, 2019
.
Answers (1)
-
State the definition of atmospheric pressure
(Solved)
State the definition of atmospheric pressure
Date posted:
April 2, 2019
.
Answers (1)
-
State one factor that determines the depth to which mercury is depressed in a glass capillary tube.
(Solved)
State one factor that determines the depth to which mercury is depressed in a glass capillary tube.
Date posted:
April 2, 2019
.
Answers (1)
-
A bathroom shower has 200 holes each 2.5mm2 in area. Water flows from a pipe of cross-section
area of 15cm at 5m/s to the shower. Determine...
(Solved)
A bathroom shower has 200 holes each 2.5mm2 in area. Water flows from a pipe of cross-section
area of 15cm at 5m/s to the shower. Determine the speed of the spray.
Date posted:
April 2, 2019
.
Answers (1)
-
A piece of metal N of mass 2kg weighs 18N in water and 12N in liquid M. Determine the density of ;
(Solved)
A piece of metal N of mass 2kg weighs 18N in water and 12N in liquid M. Determine the density of ;
(i) The metal N
(ii) The liquid M
Date posted:
April 2, 2019
.
Answers (1)
-
A measuring cylinder contains 50cm3 of light oil at 0oC. When a lump of dried ice is placed in the oil, the total volume is...
(Solved)
A measuring cylinder contains 50cm3 of light oil at 0oC. When a lump of dried ice is placed in the oil, the total volume is 72cm3. Determine the density of the ice.
Date posted:
April 2, 2019
.
Answers (1)
-
The figure below shows a balloon carrying hydrogen gas 3m3 of density 0.09kgm-3. The mass of the balloon fabric is 2kg and the density of...
(Solved)
The figure below shows a balloon carrying hydrogen gas 3m3 of density 0.09kgm-3. The mass of the balloon fabric is 2kg and the density of air is 1.25kgm-3
i) Determine the tension in the string
ii) If the string is suddenly cut, calculate the acceleration of the balloon upwards
iii) What is the maximum mass of the equipment the balloon can lift at a constant velocity
Date posted:
April 2, 2019
.
Answers (1)
-
A block of mass 5kg rests on an inclined surface as shown in the diagram below:
(Solved)
A block of mass 5kg rests on an inclined surface as shown in the diagram below:
Determine the static friction on the block
Date posted:
April 2, 2019
.
Answers (1)
-
Give an example where force is applied and no work is done
(Solved)
Give an example where force is applied and no work is done
Date posted:
April 2, 2019
.
Answers (1)
-
The graph below shows the variation between force and distance for a boy pushing a concrete block of mass 25kg through a vertically height of...
(Solved)
The graph below shows the variation between force and distance for a boy pushing a concrete block of mass 25kg through a vertically height of 12m.
(i) Determine the total work done by the boy within 70m
(ii) How much energy is wasted?
(iii) Give an account for the energy wasted
Date posted:
April 2, 2019
.
Answers (1)
-
Figure below shows a wire loop with a string that has been dipped into soap solution.
(Solved)
Figure below shows a wire loop with a string that has been dipped into soap solution.
i) Sketch a similar diagram to show the observed effect if the soap film is punctured at X
ii) Explain the observations made in (i) above
Date posted:
April 2, 2019
.
Answers (1)
-
The diagram figure below shows a steel ball bearing gently dipped in a viscous liquid contained in a tall cylinder.
(Solved)
The diagram figure below shows a steel ball bearing gently dipped in a viscous liquid contained in a tall cylinder.
Name giving their directions the forces acting on the ball bearing as it moves down the cylinder.
Date posted:
April 2, 2019
.
Answers (1)
-
State the condition necessary for the law of conservation of linear momentum to hold.
(Solved)
State the condition necessary for the law of conservation of linear momentum to hold.
Date posted:
April 2, 2019
.
Answers (1)
-
Mercury on a clean glass slide collects into small spherical balls as shown in figure below.
Explain why
(Solved)
Mercury on a clean glass slide collects into small spherical balls as shown in figure below.Explain why
Date posted:
April 2, 2019
.
Answers (1)
-
The figure below shows two blocks of masses M1=1.5kg and M2 = 2.0kg which are in contact on a frictionless table
(Solved)
The figure below shows two blocks of masses M1=1.5kg and M2 = 2.0kg which are in contact on a frictionless table
A force F=7N acts on the bodies, determine the force on mass M2
Date posted:
April 2, 2019
.
Answers (1)
-
Give one difference between limiting and dynamic forces of friction
(Solved)
Give one difference between limiting and dynamic forces of friction
Date posted:
April 2, 2019
.
Answers (1)