Study the scheme below and answer the questions that follow.

Study the scheme below and answer the questions that follow.

(i) Identify the product B.
(ii) Name the compounds C and E.
(iii) State the conditions for step 1
(iv) Write the equation for the reaction leading tot the formation of methane.
(v) State two industrial uses of methane.
(vi) Identify the reagent D

---

(i) B – Sodium propoxide; F – 1,2 dibrommopropane;
(ii) C – Propanoic acid; E – Polypropene;
(iii) Catalyst – Nickel/Platinum/Pd;
Heat – 200^oC// 150 – 200^oC;
(iv) C₃H₈(g)--------> CH₄(g) + C₂H₄(g)
(v) Fuel; preparation of hydrogen /methanol/CCl₄
(vi) Concentrated sulphuric acid.

---

sharon kalunda answered the question on May 17, 2019 at 07:31

Exams With Marking Schemes

• Grade 1
• Grade 2
• Grade 3
• Grade 4
• Grade 5
• Grade 6
• Grade 7
• Grade 8
• Grade 9
• PP1
• PP2
• Playgroup
• Form 1
• Form 2
• Form 3
• Form 4

Related Questions

---

• Name the following compounds. (Solved)
  

  Name the following compounds.
  

  Date posted: May 17, 2019 .    Answers (1)

• The graph below was obtained from an experiment used to investigate the reaction between Zinc granules and 2M hydrochloric acid. (Solved)
  

  The graph below was obtained from an experiment used to investigate the reaction
  between Zinc granules and 2M hydrochloric acid.
  
  a) Calculate the rate of reaction when t = 60seconds.
  b) Suggest how the rate of the above reaction can be reduced so that it can be studied more closely at the same temperature.

  Date posted: May 17, 2019 .    Answers (1)

• Describe two observable characteristics of a luminous flame (Solved)
  

  Describe two observable characteristics of a luminous flame.

  Date posted: May 17, 2019 .    Answers (1)

• Write a chemical equation for the combustion of laboratory gas , when the Bunsen burner produces a non-luminous flame. (Solved)
  

  Write a chemical equation for the combustion of laboratory gas , when the
  Bunsen burner produces a non-luminous flame.

  Date posted: May 17, 2019 .    Answers (1)

• Explain why during the extraction of metals, copper can be extracted by the electrolysis of copper (II) sulphate solution, while aluminium chloride cannot be extracted by... (Solved)
  

  Explain why during the extraction of metals, copper can be extracted by the electrolysis of
  copper (II) sulphate solution, while aluminium chloride cannot be extracted by electrolysis of
  aluminium sulphate solution.

  Date posted: May 17, 2019 .    Answers (1)

• Study the following equilibrium equation and answer the questions that follows. (Solved)
  

  Study the following equilibrium equation and answer the questions that follows.
  
  Explain how ammonia gas can be prepared in the laboratory.

  Date posted: May 17, 2019 .    Answers (1)

• The following diagram represents a set-up used to investigate conditions necessary for rusting of iron. (Solved)
  

  The following diagram represents a set-up used to investigate conditions necessary for rusting of iron.
  
  
  After several days it was found that the nails did not rust. Identify solid P.

  Date posted: May 17, 2019 .    Answers (1)

• In the chemistry laboratory, both blue and red litmus papers are used to test for the nature of gases and solutions. Explain (Solved)
  

  In the chemistry laboratory, both blue and red litmus papers are used to test for the nature
  of gases and solutions. Explain

  Date posted: May 17, 2019 .    Answers (1)

• Explain why graphite is preferred to lubricating oil in the moving parts of the machine. (Solved)
  

  Explain why graphite is preferred to lubricating oil in the moving parts of the machine.

  Date posted: May 17, 2019 .    Answers (1)

• Q grams of a radioactive isotope sample takes 80 days to disintegrate to 7g. The halflife of the isotope is 20days. Find the initial mass... (Solved)
  

  Q grams of a radioactive isotope sample takes 80 days to disintegrate to 7g. The halflife of the isotope is 20days. Find the initial mass Q.

  Date posted: May 17, 2019 .    Answers (1)

• In the laboratory, chlorine gas can be prepared by the reaction; (Solved)
  

  In the laboratory, chlorine gas can be prepared by the reaction;
  
  Given the following half- cell reactions;
  
  Use the E^θ cell to explain how the above reaction is carried out in the laboratory.

  Date posted: May 17, 2019 .    Answers (1)

• State the main differences between alkanes and alkenes in terms of the following; (Solved)
  

  State the main differences between alkanes and alkenes in terms of the following;
  i) Structure and bonding
  ii) Reaction with chlorine gas.

  Date posted: May 17, 2019 .    Answers (1)

• A fixed mass of a gas has a volume of 250cm³ at 27^oC and 750mmHg pressure. Calculate thegas volume that the gas would occupy at 41^oC... (Solved)
  

  A fixed mass of a gas has a volume of 250cm³ at 27^oC and 750mmHg pressure.
  Calculate thegas volume that the gas would occupy at 41^oC and 750mmHg pressure.
  (0^o = 273k)

  Date posted: May 17, 2019 .    Answers (1)

• When chlorine gas is dissolved in water it acts as a bleaching agent. (Solved)
  

  When chlorine gas is dissolved in water it acts as a bleaching agent.
  a) Write a chemical equation to show the role of water in the bleaching property of chlorine.
  b) Name the chlorine compound that is present in the commercial bleaching agents.Give a reason for your answer.

  Date posted: May 17, 2019 .    Answers (1)

• The heat of combustion of carbon, hydrogen and methane are 405kJ/mol, 286kJ/mol and886kJ/mol respectively. (Solved)
  

  The heat of combustion of carbon, hydrogen and methane are 405kJ/mol, 286kJ/mol and886kJ/mol respectively.
  Calculate the heat change for the reaction, ΔH.
  C_(s) + 2H_2(g) ------> CH_4(g); ΔH
  

  Date posted: May 17, 2019 .    Answers (1)

• Name the polymer with the following structural formula and state its commercial use. (Solved)
  

  Name the polymer with the following structural formula and state its commercial use.
  

  Date posted: May 17, 2019 .    Answers (1)

• Describe how you would obtain pure solid samples of each of the following components of a solid mixture containing ; Lead (II) chloride, Sodium carbonate and... (Solved)
  

  Describe how you would obtain pure solid samples of each of the following components of a
  solid mixture containing ; Lead (II) chloride, Sodium carbonate and calcium sulphate.

  Date posted: May 17, 2019 .    Answers (1)

• In an experiment,1g of calcium carbonate was completely dissolved 100cm³ of 0.25M excess hydrochloric acid.Calculate the molar concentration of the acidic solution formed. (Ca = 40;... (Solved)
  

  In an experiment,1g of calcium carbonate was completely dissolved 100cm³ of 0.25M excess hydrochloric acid.Calculate the molar concentration of the acidic solution formed. (Ca = 40; C = 12; O =16).

  Date posted: May 17, 2019 .    Answers (1)

• A hydrocarbon has an empirical formula C₂H₃and a relative molecular mass of 54. (Solved)
  

  A hydrocarbon has an empirical formula C₂H₃and a relative molecular mass of 54.
  a) Determine the molecular formula of the hydrocarbon ( C=12; H=1)
  b) Name the homologous series to which the hydrocarbon belongs. Give a reason for your answer.
  c) When one mole of the hydrocarbon reacts with one mole of hydrogen chloride gas,
  compound W is formed. Give the IUPAC systematic name of W.

  Date posted: May 16, 2019 .    Answers (1)

• Explain the meanings of the following physical properties of laboratory gases. (Solved)
  

  Explain the meanings of the following physical properties of laboratory gases.
  i) A chocking smell.
  ii) An irritating smell.
  iii) A neutral gas

  Date posted: May 16, 2019 .    Answers (1)