-
A column of glycerine 8.20m high, a column of sea water 10.08m high, column of mercury 0.76m high and a column of fresh water 10.34m...
(Solved)
A column of glycerine 8.20m high, a column of sea water 10.08m high, column of mercury 0.76m high and a column of fresh water 10.34m high exert the same pressure at the bottom of the container.Given that the pressure exerted by a fluid is given by P = h g, arrange these liquid in decreasing order of their densities.
Date posted:
May 31, 2019
.
Answers (1)
-
5 images are formed when two mirrors are inclined at an angle between them. Determine the angle of inclination.
(Solved)
5 images are formed when two mirrors are inclined at an angle between them. Determine the angle of inclination.
Date posted:
May 31, 2019
.
Answers (1)
-
A stone of mass 450g is rotated in a vertical circle at 3 revolutions per second. If the string has a length of 1.5m,
determine:
(i) the...
(Solved)
A stone of mass 450g is rotated in a vertical circle at 3 revolutions per second. If the string has a length of 1.5m,
determine:
(i) the linear velocity
(ii) The tension of the string at positions A and B.
Date posted:
May 31, 2019
.
Answers (1)
-
A mass of wax of 1kg was heated uniformly by a 100W heating element until it melted. The graph below shows how the temperature of...
(Solved)
A mass of wax of 1kg was heated uniformly by a 100W heating element until it melted. The graph below shows how the temperature of the wax varies with time.
(i) Explain what is happening in the region.
AB
BC
(ii) Calculate the specific heat capacity of the wax.
(iii) Calculate the specific latent heat of fusion of wax.
Date posted:
May 31, 2019
.
Answers (1)
-
The figure below shows a model of a spray gun. When air is blown in the direction shown, a spray is observed. Explain this observation.
(Solved)
The figure below shows a model of a spray gun. When air is blown in the direction shown, a spray is observed. Explain this observation.
Date posted:
May 31, 2019
.
Answers (1)
-
An external force applied to a ball of mass 160g increases its velocity from 25cm/s to 275cm/s in 10 seconds. Calculate the
force applied.
(Solved)
An external force applied to a ball of mass 160g increases its velocity from 25cm/s to 275cm/s in 10 seconds. Calculate the
force applied.
Date posted:
May 31, 2019
.
Answers (1)
-
Two equal masses travel towards each other on a frictionless air track at speeds of 60cm/s and 40cm /s. They stick together on impact.
What is...
(Solved)
Two equal masses travel towards each other on a frictionless air track at speeds of 60cm/s and 40cm /s. They stick together on impact.
What is the velocity of the masses after impact?
Date posted:
May 31, 2019
.
Answers (1)
-
The figure below shows a solid cone standing on a horizontal surface. The cone is in unstable equilibrium.
On the horizontal space provided, sketch the cone...
(Solved)
The figure below shows a solid cone standing on a horizontal surface. The cone is in unstable equilibrium.
On the horizontal space provided, sketch the cone in neutral equilibrium.
Date posted:
May 31, 2019
.
Answers (1)
-
A jet fighter moving horizontally at a speed of 200m/s at a height of 2km above the ground is to drop a bomb to hit...
(Solved)
A jet fighter moving horizontally at a speed of 200m/s at a height of 2km above the ground is to drop a bomb to hit a target on the ground. How long does the bomb stay in air after release before it hit the target?
Date posted:
May 31, 2019
.
Answers (1)
-
The figure below shows a uniform rule AB of length 1.0m and weight 1.2N. The system is in equilibrium.
Determine the weight of X.
(Solved)
The figure below shows a uniform rule AB of length 1.0m and weight 1.2N. The system is in equilibrium.
Determine the weight of X.
Date posted:
May 31, 2019
.
Answers (1)
-
The graph below shows the variation of force with distance for a body being towed.
Calculate the total work done on the body.
(Solved)
The graph below shows the variation of force with distance for a body being towed.
Calculate the total work done on the body.
Date posted:
May 31, 2019
.
Answers (1)
-
Two gear wheel have a 80 teeth (driven) and 20 teeth (driving) and lock with each other. They are fastened on axles of
equal diameters such...
(Solved)
Two gear wheel have a 80 teeth (driven) and 20 teeth (driving) and lock with each other. They are fastened on axles of
equal diameters such that a weight of 150N attached to a string round one axle will just raise 450N on the other axle.
Calculate
(i) M.A
(ii) V.R
(iii) Efficiency of the machine.
Date posted:
May 31, 2019
.
Answers (1)
-
What is a machine?
(Solved)
What is a machine?
Date posted:
May 31, 2019
.
Answers (1)
-
The figure below shows a master cylinder sealed at one end. Instead of brake fluid, the cylinder contains air.
When a force is applied to the...
(Solved)
The figure below shows a master cylinder sealed at one end. Instead of brake fluid, the cylinder contains air.
When a force is applied to the piston, the length d changes from 6.0cm to 4.0cm. The pressure of the air increases but the temperature stays constant.
(i) Describe how the molecules of air exert a pressure.
(ii) Explain why the pressure increases even though the temperature stays constant.
(iii) The initial pressure of the air inside the cylinder is 1.0 x 105 pa. Calculate the final pressure of the air.
Date posted:
May 31, 2019
.
Answers (1)
-
State one advantage of alcohol thermometer over mercury thermometer.
(Solved)
State one advantage of alcohol thermometer over mercury thermometer.
Date posted:
May 31, 2019
.
Answers (1)
-
The figure below shows a car braking system. The brake fluid is an oily liquid.
The brake drum rotates with the wheel of the car.
(i) Explain...
(Solved)
The figure below shows a car braking system. The brake fluid is an oily liquid.
The brake drum rotates with the wheel of the car.
(i) Explain how pushing the brake pedal makes the brake rub against the drum.
(ii) The cross-sectional area of the master piston is 2.0cm2. A force of 140N is applied to the master piston.
(I) Calculate the pressure created in the brake fluid by the master piston.
(II) The cross-sectional area of each slave piston is 2.8cm2. Calculate the force exerted on each slave piston by the brake fluid.
(III) The force exerted on the master piston is greater than the force applied by the foot on the brake pedal. Using the principle of moments, explain this
Date posted:
May 31, 2019
.
Answers (1)
-
The figure below shows two containers filled with two different liquids to the same height.
It was found that the pressure at the bottom of A...
(Solved)
The figure below shows two containers filled with two different liquids to the same height.
It was found that the pressure at the bottom of A is greater than that at B. Explain
Date posted:
May 31, 2019
.
Answers (1)
-
A rubber tube is inflated to pressure of 2.7 x 105 pa and volume 3800cm3 at temperature of 250C. It is then taken to another...
(Solved)
A rubber tube is inflated to pressure of 2.7 x 105 pa and volume 3800cm3 at temperature of 250C. It is then taken to another place where the temperature is 150C and the pressure is 2.5 x 105 pa. Determine the new volume
Date posted:
May 31, 2019
.
Answers (1)
-
The figure shows a manometer used to measure the pressure difference between the air inside a plastic container and the atmosphere outside.
Calculate the force F...
(Solved)
The figure shows a manometer used to measure the pressure difference between the air inside a plastic container and the atmosphere outside.
Calculate the force F exerted on the container.
Date posted:
May 31, 2019
.
Answers (1)
-
The figure below shows a bottle opener.
A force of 30N is applied at a distance of 11cm from the pivot P. The force F on...
(Solved)
The figure below shows a bottle opener.
A force of 30N is applied at a distance of 11cm from the pivot P. The force F on the bottle cap of 1.5cm from the pivot P. Calculate the force F on the edge of the cap.
Date posted:
May 31, 2019
.
Answers (1)