Study the chart below and answer the questions that follow.

Study the chart below and answer the questions that follow.


(a) Identity solid X.
(b) Write an ionic equation for the reaction between P and copper (II) sulphide solution.
(c) State the observation made when gas P is bubbled through iron (III) chloride solution.

---

(a) Identity solid X.
Hydrated iron (III) oxide

(b)


(c) State the observation made when gas P is bubbled through iron (III) chloride solution.
The yellow iron (III) chloride solution turns green.

---

maurice.mutuku answered the question on September 12, 2019 at 08:09

Exams With Marking Schemes

• Grade 1
• Grade 2
• Grade 3
• Grade 4
• Grade 5
• Grade 6
• Grade 7
• Grade 8
• Grade 9
• PP1
• PP2
• Playgroup
• Form 1
• Form 2
• Form 3
• Form 4

Related Questions

---

• Perspex is a synthetic polymer of formula (Solved)
  

  Perspex is a synthetic polymer of formula
  
  
  (a) Write the structural formula of the monomer of Perspex.
  (b) State the type of polymerization involved in the formation of perspex.

  Date posted: September 12, 2019 .    Answers (1)

• When 8.8g of hydrocarbon Z was burnt in excess air, 14.4g of water and 11.95 dm³ of carbon (IV) oxide were obtained at s.t.p. Determine... (Solved)
  

  When 8.8g of hydrocarbon Z was burnt in excess air, 14.4g of water and 11.95 dm³ of carbon (IV) oxide were obtained at s.t.p. Determine the empirical formula of Z.

  Date posted: September 12, 2019 .    Answers (1)

• State the conditions under which copper reacts with sulphuric acid and give an equation for the reaction. (Solved)
  

  State the conditions under which copper reacts with sulphuric acid and give an equation for the reaction.

  Date posted: September 12, 2019 .    Answers (1)

• Use the thermochemical equations below to calculate the enthalpy of formation of ethane. (Solved)
  

  Use the thermochemical equations below to calculate the enthalpy of formation of ethane.
  
  
  

  Date posted: September 12, 2019 .    Answers (1)

• Manganese sulphide reacts with acids according to the following equation. (Solved)
  

  Manganese sulphide reacts with acids according to the following equation.
  
  
  State, giving a reason what would happen to the equilibrium if;
  (i) Water is added to the equilibrium mixture.
  (ii) Hydrogen chloride is bubbled into the equilibrium mixture.

  Date posted: September 12, 2019 .    Answers (1)

• Explain why flammable substances should always be kept away from flames in the laboratory. (Solved)
  

  Explain why flammable substances should always be kept away from flames in the laboratory.

  Date posted: September 12, 2019 .    Answers (1)

• When a sample of ethane was burnt, the heat provided raised the temperature of 500cm³ of water by 21.5k (specific heat capacity of water = 4.2kJ/kg/k... (Solved)
  

  When a sample of ethane was burnt, the heat provided raised the temperature of 500cm³ of water by 21.5k
  (specific heat capacity of water = 4.2kJ/kg/k and density of water = 1g/cm³.
  
  Calculate the:
  (i) Heat change for the reaction.
  (ii) Mass of ethane burnt (RFM of ethane = 30).

  Date posted: September 12, 2019 .    Answers (1)

• Use the thermo chemical equations below to answer the questions that follow. (Solved)
  

  Use the thermo chemical equations below to answer the questions that follow.
  
  
  (i) Name two types of heat changes represent by
  (ii) Draw an energy level diagram for the reaction represented by equation 1.
  (iii) Calculate the standard enthalpy of formation of ethane.

  Date posted: September 12, 2019 .    Answers (1)

• Study the following part of periodic table chart and use it to answer the question that follow. The letters are of the actual symbols of... (Solved)
  

  Study the following part of periodic table chart and use it to answer the question that follow. The letters are of the actual symbols of the elements.
  
  
  (i) Which elements form ions with charge of -2. Explain.
  
  (ii) Compare the ionic radius of C and E. Explain.
  
  (iii) Write the formular of the compound formed between element G and H.
  
  (iv) In terms of structure of bonding, explain why the oxides of D has a lower melting point than that of G.
  
  (v) Write an equation to show the action of heat on nitrates of F and G.

  Date posted: September 12, 2019 .    Answers (1)

• The reaction between Lead (II) Nitrate and concentrated sulphuric (VI) acid starts but stops immediately.Explain. (Solved)
  

  The reaction between Lead (II) Nitrate and concentrated sulphuric (VI) acid starts but stops immediately.Explain.

  Date posted: September 12, 2019 .    Answers (1)

• The table below gives the solubilities of potassium nitrate at different temperatures. (Solved)
  

  The table below gives the solubilities of potassium nitrate at different temperatures.
  
  
  (i) Plot a graph of the solubility of potassium nitrate (vertical axis) against temperature.
  (ii) Using the graph:
  I. Determine the solubility of potassium nitrate at 15⁰C.
  II. Determine the mass of potassium nitrate that remained undissolved given that 80g of potassium nitrate were added to 100cm³ of water and warmed to 40⁰C. (2mks)
  (iii) Determine the molar concentration of potassium nitrate at 150⁰C. (Assume there is no change in density of water at this
  temperature) (K = 39.0; N = 14.0; O = 16.0)

  Date posted: September 12, 2019 .    Answers (1)

• Draw the structural formula of Butyne (Solved)
  

  Draw the structural formula of Butyne

  Date posted: September 12, 2019 .    Answers (1)

• Use standard electrode potentials of elements A, B, C, D and F given below to answer the questions that follow. The letters do not represent... (Solved)
  

  Use standard electrode potentials of elements A, B, C, D and F given below to answer the questions that follow. The letters do not represent the actual symbols of the elements.
  
  
  (i) Which element is likely to be hydrogen? Give a reason for your answer.
  (ii) What is the value of the strongest reducing agent?
  (iii) In the space provided, draw a labeled diagram of the electrochemical cell that would be obtained when half-cells of element B and D are combined.
  (iv) Calculate the value of the electrochemical cell constructed in (iii) above.

  Date posted: September 12, 2019 .    Answers (1)

• Study the flow chart below and answer the question that follow. (Solved)
  

  Study the flow chart below and answer the question that follow.
  
  
  Name the substances: C and D

  Date posted: September 12, 2019 .    Answers (1)

• The diagram below shows heating curve of water in the laboratory. (Solved)
  

  The diagram below shows heating curve of water in the laboratory.
  
  (i) At what temperature does the water boil?
  (ii) Giving reason(s) is this pure or impure water?
  (iii) State the effect of impurities on the boiling point of water?

  Date posted: September 12, 2019 .    Answers (1)

• The curves below represent the volume of carbon (IV) oxide gas evolved when 1M concentrated hydrochloric acid and 60g of calcium carbonate and also 0.5M... (Solved)
  

  The curves below represent the volume of carbon (IV) oxide gas evolved when 1M concentrated hydrochloric acid and 60g of calcium carbonate and also 0.5M concentrated hydrochloric acid was reacted with the same quantity of the carbonate.
  
  
  (a) Which of the curves represent the reaction of 1M concentrated hydrochloric acid with powdered calcium carbonate.
  Explain.
  
  (b) Explain why the curves flatters at the same level of production of carbon (IV) oxide.

  Date posted: September 12, 2019 .    Answers (1)

• Study the diagram and use it to answer the question that follow. (Solved)
  

  Study the diagram and use it to answer the question that follow.
  
  
  (i) State the observations in the combustion tube.
  (ii) Describe the chemical test for product B.

  Date posted: September 11, 2019 .    Answers (1)

• Complete the table below. (Solved)
  

  Complete the table below.
  

  Date posted: September 11, 2019 .    Answers (1)

• Nitrogen (II) oxide can be prepared by catalytic oxidation of ammonia. Name the catalyst used in the process. (Solved)
  

  Nitrogen (II) oxide can be prepared by catalytic oxidation of ammonia. Name the catalyst used in the process.

  Date posted: September 11, 2019 .    Answers (1)

• When hydrocarbon was completely burnt in air, 2.51g of carbon (IV) oxide and 1.28g of water were formed. Given that the compound has a relative... (Solved)
  

  When hydrocarbon was completely burnt in air, 2.51g of carbon (IV) oxide and 1.28g of water were formed. Given that the compound has a relative molecular mass of 58, find its molecular formular (C = 12, H=1).

  Date posted: September 11, 2019 .    Answers (1)