
The frame relay is being used for a number of reasons. Some of the important reasons are as follows:
1. Higher data rates.
2. It allows transfer of bursty data.
3. It has lower overheads.
• Let us discuss these points one by one.
1. Higher Data Rates
It allows transfer of bursty data.
• If the LANs located at physically distant places are to be connected to each other then there are two options available to do this.
1. Interconnect them using the T lines.
2. Interconnect using the frame relay.
2. Can handle bursty data:
• The data being sent from a source to destination is not of continuous/constant nature.
• Instead it is bursty in nature. That means a large amount of data (data burst) is sent suddenly, then for sometime there is very little or no data.
• The T-lines are not equipped to handle such bursty data because they offer a constant data rate.
• The frame relay can tackle this problem. It supports a minimum average data rate and can handle the bursty data.
3. Lower overheads:
• In frame relay network, there are no acknowledgements sent from the switches back to the sender.
• There is no intermediate error check. The error checking takes place only at the destination.
• The intermediate host/switch does not keep a copy of the packet forwarded to the next host/switch. This saves a lot of memory space of the hosts and switches.
• All this lead to reduced overheads.
Titany answered the question on November 30, 2021 at 13:28
-
Difference between contention-based and controlled media access methods
(Solved)
Difference between contention-based and controlled media access methods
Date posted:
November 30, 2021
.
Answers (1)
-
Explain two circumstances under which coaxial cables are most applicable in a network installation
(Solved)
Explain two circumstances under which coaxial cables are most applicable in a network installation
Date posted:
November 30, 2021
.
Answers (1)
-
Figure 2 shows typical tools in browser, Outline the function of each of the tools labelled (i), (ii), (iii) and (iv)
(Solved)
Figure 2 shows typical tools in browser, Outline the function of each of the tools labelled (i), (ii), (iii) and (iv)

Date posted:
November 30, 2021
.
Answers (1)
-
Use of passwords expiration feature in data communication systems is unpopular. Explain two limitations of this feature
(Solved)
Use of passwords expiration feature in data communication systems is unpopular. Explain two limitations of this feature
Date posted:
November 30, 2021
.
Answers (1)
-
Joan was requested to patch communication software in her company’s computers. Explain two reasons that could have influenced the request
(Solved)
Joan was requested to patch communication software in her company’s computers. Explain two reasons that could have influenced the request
Date posted:
November 30, 2021
.
Answers (1)
-
With aid of a diagram, describe TCP handshake
(Solved)
With aid of a diagram, describe TCP handshake
Date posted:
November 30, 2021
.
Answers (1)
-
Copper cables offer different throughputs in data communication. Outline four factors that influence the cables
(Solved)
Copper cables offer different throughputs in data communication. Outline four factors that influence the cables
Date posted:
November 30, 2021
.
Answers (1)
-
Routing protocols use routing tables to establish the source and destination of data packets in transit. Explain three routing path determination methods used by these...
(Solved)
Routing protocols use routing tables to establish the source and destination of data packets in transit. Explain three routing path determination methods used by these protocols
Date posted:
November 30, 2021
.
Answers (1)
-
Differentiate between information security and network infrastructure security
(Solved)
Differentiate between information security and network infrastructure security
Date posted:
November 30, 2021
.
Answers (1)
-
A network design should meet several user needs. Outline four examples of such needs
(Solved)
A network design should meet several user needs. Outline four examples of such needs
Date posted:
November 30, 2021
.
Answers (1)
-
Explain two circumstances under which unshielded fibre optic cables are used to build a LAN
(Solved)
Explain two circumstances under which unshielded fibre optic cables are used to build a LAN
Date posted:
November 30, 2021
.
Answers (1)
-
Explain three circumstances that would necessitate the use of PAP authentication in a point to point connection
(Solved)
Explain three circumstances that would necessitate the use of PAP authentication in a point to point connection
Date posted:
November 30, 2021
.
Answers (1)
-
Distinguish between multicast and broadcast IP addresses
(Solved)
Distinguish between multicast and broadcast IP addresses
Date posted:
November 30, 2021
.
Answers (1)
-
Distinguish between intermediary and host devices
(Solved)
Distinguish between intermediary and host devices
Date posted:
November 30, 2021
.
Answers (1)
-
Explain two circumstances under which unshielded twisted pair (UTP) cables are most applicable in network installation
(Solved)
Explain two circumstances under which unshielded twisted pair (UTP) cables are most applicable in network installation
Date posted:
November 30, 2021
.
Answers (1)
-
Outline four roles of user agent as used in email software
(Solved)
Outline four roles of user agent as used in email software
Date posted:
November 30, 2021
.
Answers (1)
-
Explain three circumstances that would necessitate the installation of a point-to-point protocol in corporate networks
(Solved)
Explain three circumstances that would necessitate the installation of a point-to-point protocol in corporate networks
Date posted:
November 30, 2021
.
Answers (1)
-
Outline two applications of a CSMA/CD technology
(Solved)
Outline two applications of a CSMA/CD technology
Date posted:
November 30, 2021
.
Answers (1)
-
Explain three Internet services that could be utilized by students in technical institutions
(Solved)
Explain three Internet services that could be utilized by students in technical institutions
Date posted:
November 30, 2021
.
Answers (1)
-
With the aid of a diagram, represent the data 10110001 in the form of a digital
encoded wave form
(Solved)
With the aid of a diagram, represent the data 10110001 in the form of a digital
encoded wave form
Date posted:
November 30, 2021
.
Answers (1)