Briefly explain two ways other than direct heating by which quantity of liquid may be made to evaporate more quickly

Briefly explain two ways other than direct heating by which quantity of liquid may be made to evaporate more quickly

---

-Blowing wind over the surface of the liquid increases the kinetic energy of the
liquid molecules.
- It can also be made to evaporate faster by bubbling air though the liquid as it increases the
surface area from which the liquid molecules may escape.

---

sharon kalunda answered the question on April 2, 2019 at 08:26

Exams With Marking Schemes

• Grade 1
• Grade 2
• Grade 3
• Grade 4
• Grade 5
• Grade 6
• Grade 7
• Grade 8
• Grade 9
• PP1
• PP2
• Playgroup
• Form 1
• Form 2
• Form 3
• Form 4

Related Questions

---

• 0.5kg of naphthalene contained in an aluminium can of mass 0.4kg is melted in a water bath and raised to a temperature of 100^oC .... (Solved)
  

  0.5kg of naphthalene contained in an aluminium can of mass 0.4kg is melted in a water bath and raised to a temperature of 100^oC . Calculate the total heat given out when the can and its contents are allowed to cool to room temperature, 20^oC . Neglect losses by evaporation during heating process and give your answer to the nearest kilojoule.(For naphthalene melting point = 80^oC , Specific heat capacity for both liquid and solid =2100J/KgK; specific latent heat of fusion = 170000J/Kg.For aluminium: specific heat capacity = 900J/Kg/k

  Date posted: April 2, 2019 .    Answers (1)

• An electric heater 1KW 240V is used to raise the temperature of a 5kg copper block from 15^oC to 33^oC. If the specific heat capacity... (Solved)
  

  An electric heater 1KW 240V is used to raise the temperature of a 5kg copper block from 15^oC to 33^oC. If the specific heat capacity of copper is 400J/Kg/K and assuming no heat is lost to the surrounding,Calculate the time taken.

  Date posted: April 2, 2019 .    Answers (1)

• Explain why steel feels colder than wood at the same temperature. (Solved)
  

  Explain why steel feels colder than wood at the same temperature.

  Date posted: April 2, 2019 .    Answers (1)

• Figure below shows a test tube partially filled with water. An ice wrapped in wire gauze is placed at the bottom of the test-tube. It... (Solved)
  

  Figure below shows a test tube partially filled with water. An ice wrapped in wire gauze is placed at the bottom of the test-tube. It is then held in the flame of a bunsen burner as shown below
  
  State and explain what will be observed after some time

  Date posted: April 2, 2019 .    Answers (1)

• The figure below shows two identical thermometers. Thermometer A has a blackened bulb while thermometer B has a silvery bulb. A candle is placed equidistant between... (Solved)
  

  The figure below shows two identical thermometers. Thermometer A has a blackened bulb while thermometer B has a silvery bulb. A candle is placed equidistant between the two thermometers.
  
  State with a reason the observations made after some time

  Date posted: April 2, 2019 .    Answers (1)

• Figure below shows a cross-section of a vacuum flask (i) Name the parts labelled A and B on the diagram... (Solved)
  

  Figure below shows a cross-section of a vacuum flask
  
  (i) Name the parts labelled A and B on the diagram
  (ii) Explain how the heat losses are minimized when hot liquid is poured into the flask

  Date posted: April 2, 2019 .    Answers (1)

• A jet delivering 0.44g of dry steam per second, at 100^oC is directed on to crushed ice at 0.0^oC contained in an unlagged copper can... (Solved)
  

  A jet delivering 0.44g of dry steam per second, at 100^oC is directed on to crushed ice at 0.0^oC contained in an unlagged copper can which has a hole in the base. 4.44g of water at 0.0^oC flow out of the hole per second.
  (i) How many joules of heat are given out per second by condensing steam and cooling to 0.0^oC of water formed?(Latent heat of vaporization of steam = 2.26 x 106JKg-1,c for water = 4200JKg-1K-1)
  (ii) How much heat is taken in per second by the ice which melts?
  (iii) Suggest why these amounts above are different

  Date posted: April 2, 2019 .    Answers (1)

• A block of metal of mass 150g at 100^oC is dropped into a logged calorimeter of heat capacity 40J/k containing 100g of water at 25^oC. The... (Solved)
  

  A block of metal of mass 150g at 100^oC is dropped into a logged calorimeter of heat capacity
  40J/k containing 100g of water at 25^oC. The temperature of the resulting mixture is 34^oC.
  (Specific heat capacity of water = 4200J/KgK)
  Determine;-
  (i) Heat gained by calorimeter
  (ii) Heat gained by water
  (iii) Heat lost by the metal block
  (iv) Specific heat capacity of the metal block

  Date posted: April 2, 2019 .    Answers (1)

• 200g of a solid was uniformly heated by a 0.2 kw heater for sometime. The graph in the figure below shows how the temperature of... (Solved)
  

  200g of a solid was uniformly heated by a 0.2 kw heater for sometime. The graph in the figure below shows how the temperature of the solid changed with time.
  
  (i) Explain what is happening between OA and AB.
  (ii) Calculate the specific heat capacity of the solid.
  (iii) Calculate the specific latent heat of fusion k of the solid.

  Date posted: April 2, 2019 .    Answers (1)

• A block of metal of mass 300g at 100⁰c is dropped into a logged calorimeter of heat capacity40Jk^-1, containing 200g of water at 20⁰c. The... (Solved)
  

  A block of metal of mass 300g at 100⁰c is dropped into a logged calorimeter of heat capacity40Jk^-1, containing 200g of water at 20⁰c. The temperature of the resulting mixture is 34⁰c
  Determine:
  (i) Heat gained by calorimeter.
  (ii) Heat gained by water.
  (iii) Heat lost by the metal block.
  (iv) Specific heat capacity of the metal block.

  Date posted: April 2, 2019 .    Answers (1)

• A mass of 2kg is attached to a string of length 50 cm. It is whirled in a circle in a vertical plane at 10 revolution... (Solved)
  

  A mass of 2kg is attached to a string of length 50 cm. It is whirled in a circle in a vertical plane
  at 10 revolution per second about a horizontal axis. Calculate the tension in the string when the
  mass is at the :-
  (a)Highest point of the circle.
  (b) Lowest part of the circle.

  Date posted: April 2, 2019 .    Answers (1)

• A wooden block of mass 200g is placed at various distances from the center of a turntable,which is rotating at constant angular velocity. It is... (Solved)
  

  A wooden block of mass 200g is placed at various distances from the center of a turntable,which is rotating at constant angular velocity. It is found that at a distance of 8.0cm from the center, the block just starts to slide off the table. If the force of friction between the block and the table is 0.4N, Calculate:
  (i) The angular velocity of the table
  (ii) The force required to hold the block at a distance of 12cm from the center of the table

  Date posted: April 2, 2019 .    Answers (1)

• A small pendulum bob having a mass of 150g is suspended by an inelastic string of length 0.5m. The mass is made to rotate in... (Solved)
  

  A small pendulum bob having a mass of 150g is suspended by an inelastic string of length 0.5m. The mass is made to rotate in a horizontal circle of radius 0.4m and whose centre is vertically below the point of suspension
  (i) Determine the tension in the string
  (ii) State one application of the pendulum

  Date posted: April 2, 2019 .    Answers (1)

• The figure below shows an object of mass 0.2kg whirled in a vertical cycle of radius 0.5m at uniform speed of 5m/s (Solved)
  

  The figure below shows an object of mass 0.2kg whirled in a vertical cycle of radius 0.5m at uniform speed of 5m/s
  
  Determine
  (i) The tension in the string at position A
  (ii) The tension in the string at position B
  (iii) The tension in the string at position C
  (iv) From the values obtained in (i) (ii) and (iii) above, determine the point the string will most
  likely snap. Explain
  

  Date posted: April 2, 2019 .    Answers (1)

• Explain why a cyclist going round a bend at high speed tilts inwards (Solved)
  

  Explain why a cyclist going round a bend at high speed tilts inwards

  Date posted: April 2, 2019 .    Answers (1)

• A fun fair ride of diameter 12m makes 0.5 revolutions per second. (Solved)
  

  A fun fair ride of diameter 12m makes 0.5 revolutions per second.
  (i) Determine the periodic time, T, of the revolutions.
  (ii) Determine its angular velocity.
  (iii) Determine the linear velocity of the child riding in it.
  (iv) If the mass of the child is 30 kg, find the centripetal force that keeps the child in the
  motion.

  Date posted: April 2, 2019 .    Answers (1)

• Give a reason why bodies in circular motion undergo acceleration even when their speed is constant (Solved)
  

  Give a reason why bodies in circular motion undergo acceleration even when their speed is constant

  Date posted: April 2, 2019 .    Answers (1)

• A ship of mass 1300 tonnes floats on sea water: (Solved)
  

  A ship of mass 1300 tonnes floats on sea water:
  (i) What volume of sea water is displaced (Density of sea water is 1025kg/m³)
  (ii) Suppose it sails from sea water to fresh water, what cargo must be removed so that the same volume of water is displaced? (Density of fresh water = 1000kg/m³

  Date posted: April 2, 2019 .    Answers (1)

• A block of glass of mass 250g floats in mercury. What volume of glass lies under the surface of Mercury? Density of mercury is 13.6 x... (Solved)
  

  A block of glass of mass 250g floats in mercury. What volume of glass lies under the surface
  of Mercury? Density of mercury is 13.6 x 10³ Kg/m³.

  Date posted: April 2, 2019 .    Answers (1)

• A gas is put into a container of fixed volume at a constant volume at a pressure of 2.1 x 10⁵. Nm^-2 and temperature 27°C. The... (Solved)
  

  A gas is put into a container of fixed volume at a constant volume at a pressure of 2.1 x 10⁵.
  Nm^-2 and temperature 27°C. The gas is then heated to a temperature of 327°C. Determine
  the new pressure

  Date posted: April 2, 2019 .    Answers (1)