Highlight the steps followed when lighting a Bunsen burner

Highlight the steps followed when lighting a Bunsen burner

---

Close the air-hole
- Strike a match and place it on top the chimney
- Open the air-hole

---

Githiari answered the question on September 18, 2017 at 08:01

Exams With Marking Schemes

• Grade 1
• Grade 2
• Grade 3
• Grade 4
• Grade 5
• Grade 6
• Grade 7
• Grade 8
• Grade 9
• PP1
• PP2
• Playgroup
• Form 1
• Form 2
• Form 3
• Form 4

Related Questions

---

• 5.0g of calcium carbonate were allowed to react with 25cm³ of 1.0M hydrochloric acid until there was no further reaction. Calculate the mass of calcium... (Solved)
  

  5.0g of calcium carbonate were allowed to react with 25cm³ of 1.0M hydrochloric acid until
  there was no further reaction. Calculate the mass of calcium carbonate that remained
  unreacted(Ca = 40, C = 12, O = 16).

  Date posted: September 18, 2017 .    Answers (1)

• Give two physical properties of hydrogen gas (Solved)
  

  Give two physical properties of hydrogen gas

  Date posted: September 18, 2017 .    Answers (1)

• Dry carbon (II) oxide gas was passed over heated lead (II) oxide. (a) Write an equation for the reaction (b) Give one industrial application of the above... (Solved)
  

  Dry carbon (II) oxide gas was passed over heated lead (II) oxide.
  (a) Write an equation for the reaction
  (b) Give one industrial application of the above reaction.
  (c) Name another gas that can be used in the above reaction.

  Date posted: September 18, 2017 .    Answers (1)

• Explain the effects of the accumulation of nitrogenous compounds in water masses? (Solved)
  

  Explain the effects of the accumulation of nitrogenous compounds in water masses?

  Date posted: September 18, 2017 .    Answers (1)

• State two conditions that would make the boiling point of water to be higher than 100^oC (Solved)
  

  State two conditions that would make the boiling point of water to be higher than 100^oC

  Date posted: September 18, 2017 .    Answers (1)

• a)Why is the percentage of carbon(IV)oxide in the atmosphere fairly constant? (b)Calculate the volume of carbon(IV)oxide in 8,000 m³ of air contained in a hall. (Solved)
  

  a)Why is the percentage of carbon(IV)oxide in the atmosphere fairly constant?
  b)Calculate the volume of carbon(IV)oxide in 8,000 m³ of air contained in a

  Date posted: September 18, 2017 .    Answers (1)

• Which two elements will react more vigorously with each other between fluorine, neon, sodium, magnesium? (Solved)
  

  Which two elements will react more vigorously with each other between fluorine, neon, sodium, magnesium?

  Date posted: September 17, 2017 .    Answers (1)

• Define the term a mole? (Solved)
  

  Define the term a mole?

  Date posted: September 16, 2017 .    Answers (1)

• Electrical conductivity decreases when temporary hard water is heated. Explain (Solved)
  

  Electrical conductivity decreases when temporary hard water is heated. Explain

  Date posted: September 14, 2017 .    Answers (1)

• a)State the Faraday’s law of electrolysis b)Calculate how long it would take an aqueous gold (III) chloride cell to coat 2.5 g of gold on a... (Solved)
  

  a)State the Faraday’s law of electrolysis
  
  b)Calculate how long it would take an aqueous gold (III) chloride cell to coat 2.5 g of gold
  on a bracelet using a current of 2.5 A. The half reaction has been provided for you.
  
  c)Two half-cells are connected under standard conditions to make an electrochemical cell.
  The two half-cells are a copper-copper (I) ion (Cu/Cu+) and an aluminum-aluminum ion (Al/Al3+). Using your the Standard Reduction Potentials below answer.
  
  Al³⁺(aq) + 3e- → Al(s) -1.66 V
  Cu²⁺(aq) + e- → Cu(s) 0.52 V
  
  i)Write the cell diagram for the cell obtained when the two half cells are connected
  ii)Identify which reaction is the anode and which is the cathode.
  (iii)Calculate the emf for the cell
  (iv)Write the overall balanced redox reaction for the electrochemical cell
  
  d)An excess of copper solid is dropped into a solution which contains AgNO₃ , Fe (NO₃)3 and Zn (NO₃)2. Write the ionic equations for any reduction half cell-reactions that occur over time under standard conditions

  Date posted: September 14, 2017 .    Answers (1)

• a)Given that the mass of copper obtained in an o extraction was 210kg, determine the percentage purity of the ore used (copper pyrites) if 810kg... (Solved)
  

  a)Given that the mass of copper obtained in an o extraction was 210kg, determine the percentage purity of the ore used (copper pyrites) if 810kg of it was fed to the 1st roasting furnace. (Cu = 63.5, Fe = 56, S = 32.0)
  
  b)Give 2 effects that the process above could have on the environment.

  Date posted: September 14, 2017 .    Answers (1)

• Write down the equation for the reaction between Ethene and hydrogen when equal numbers of moles are used. (Solved)
  

  Write down the equation for the reaction between Ethene and hydrogen when equal numbers of moles are used.

  Date posted: September 14, 2017 .    Answers (1)

• Explain how ethane and ethene can be distinguished by burning (Solved)
  

  Explain how ethane and ethene can be distinguished by burning

  Date posted: September 14, 2017 .    Answers (1)

• a) Explain how a catalyst affects the activation energy during chemical reaction. (b)In an experiment to determine the heat of combustion of methanol. CH3OH, a student... (Solved)
  

  A) Explain how a catalyst affects the activation energy during chemical reaction.
  
  B)In an experiment to determine the heat of combustion of methanol. CH3OH, a student was recorded the following requirement the following data
  Volume of water =100cm3
  Final temperature of water = 22.00c
  Initial temperature of water = 36.00c
  Final mass of lamp an methanol = 84.75g
  Initial mass of lamp and methanol=85.10g
  Density of water = 1 g/cm³
  (S.H.C of water = 4.23 g-1K-1)
  
  i)Write an equation for the combustion of methanol
  (ii) Calculate:
  (a) Number of moles of methanol used in this experiment
  (b) The heat change for this experiment
  (c) The heat of combustion per mole of methanol
  (d) Explain why the molar heat of combustion for methanol obtained above is different from the theoretical value.
  (e) State two factors to consider when choosing a fuel.
  (f) Outline two disadvantages of using hydrogen as a source of fuel.

  Date posted: September 14, 2017 .    Answers (1)

• a)Using ionic equation explain how sodium carbonate can be used to soften hard water.(b)Other than softening of hard water give 2 other uses of sodium... (Solved)
  

  a)Using ionic equation explain how sodium carbonate can be used to soften hard water.
  b)Other than softening of hard water give 2 other uses of sodium carbonate.

  Date posted: September 14, 2017 .    Answers (1)

• Predict the pH of the oxide of sulphur in water. (Solved)
  

  Predict the pH of the oxide of sulphur in water.

  Date posted: September 14, 2017 .    Answers (1)

• Write an equation to show the reaction between sulphur and oxygen. (Solved)
  

  Write an equation to show the reaction between sulphur and oxygen.

  Date posted: September 14, 2017 .    Answers (1)

• Explain why sulphur has a higher boiling point compared to that of oxygen. (Solved)
  

  Explain why sulphur has a higher boiling point compared to that of oxygen.

  Date posted: September 14, 2017 .    Answers (1)

• What is the product of sodium carbonate and sulphuric acid? (Solved)
  

  What is the product of sodium carbonate and sulphuric acid?

  Date posted: September 14, 2017 .    Answers (1)

• The standard electrode potentials of a metal G and iron are given below. Fe²⁺(aq) + 2e---->Fe(s) -0.44VG²⁺(aq) + 2e---->G(s) ... (Solved)
  

  A piece of iron is coated with metal G. If the coating is scratched, would the iron be protected from rusting? Explain.
  

  Date posted: September 13, 2017 .    Answers (1)