-
In an experiment, sulphur (IV) oxide gas was bubbled into water followed by chlorine gas. The resulting clear solution gave a white precipitate when mixed with acidified barium chloride solution. Explain these observations.
Date posted:
February 6, 2017
-
Describe a simple laboratory experiment that can be used to distinguish between sodium sulphide and sodium carbonate.
Date posted:
February 6, 2017
-
Explain the differences between the French assimilation policy and the British system of administration.
Date posted:
February 6, 2017
-
Give five factors for the failure of assimilation policy and the British system of administration.
Date posted:
February 6, 2017
-
Outline the factors for the decline/collapse of Asante empire?
Date posted:
February 6, 2017
-
Discuss the disadvantages of open field system of farming in western Europe.
Date posted:
February 6, 2017
-
Explain the problems that nationalists in Africa faced in their struggle against minority rule.
Date posted:
February 6, 2017
-
Why was Samori’s resistance protected?
Date posted:
February 6, 2017
-
In a vacuum flask the walls enclosing the vacuum are silvered on the inside. State the reason for this
Date posted:
February 6, 2017
-
A wooden bench and a metal bench are both left in the sun for a long time. Explain why the metal bench feels hotter to touch.
Date posted:
February 6, 2017
-
State two variables that must be controlled in an experiment for comparing the thermal conductivities of different metal rods of the same diameter.
Date posted:
February 6, 2017
-
When a liquid is heated in a glass flask, its level at first falls then rises. Explain this observation.
Date posted:
February 6, 2017
-
Clinical thermometer has a constriction in the bore just above the bulb. State the use of this constriction.
Date posted:
February 6, 2017
-
Explain why a glass container with thick walls is more likely to crack than one with a thin wall when a very hot liquid is poured into it.
Date posted:
February 6, 2017
-
Give a reason why a concrete beam reinforced with steel does not crack when subjected to changes in temperature.
Date posted:
February 6, 2017
-
State why it is easier to separate water into drops than to separate a solid into smaller pieces
Date posted:
February 6, 2017
-
Two identical beakers A and B containing equal volumes of water are placed on a bench. The water in A is cold while in B it is warm. Identical pieces of potassium permanganate are placed gently at the bottom of each beaker inside the water. It is observed that the spread of colour in B is faster than in A. Explain this observation
Date posted:
February 6, 2017
-
Distinguish between solid and liquid states of matter in terms of intermolecular forces.
Date posted:
February 6, 2017
-
Two identical tubes A and B held horizontally contain air and water respectively. A small quantity of coloured gas is introduced at one end of A while a small quantity of coloured water is introduced at one end of B. State with reason the tube in which the colour will reach the other end faster.
Date posted:
February 6, 2017
-
Explain the cause of random motion of smoke particles as observed in Brownian motion experiment using a smoke cell.
Date posted:
February 6, 2017
-
A student wearing sharp pointed heeled shoes is likely to damage a soft wooden floor. Explain
Date posted:
February 6, 2017
-
In an experiment to demonstrate atmospheric pressure, a plastic bottle is partially filled with hot water and the bottle is then tightly corked. After some time the bottle starts to get deformed.
i) State the purpose of the hot water
ii) State the reason why the bottle gets deformed
iii) Explain your answer in (ii)
Date posted:
February 6, 2017
-
When a bicycle pump was sealed at the nozzle and the handle slowly pushed towards the nozzle, the pressure of the air inside increased. Explain this observation.
Date posted:
February 6, 2017
-
Some water in a tin can was boiled for some time. The tin can was then sealed and cooled. After some time it collapsed. Explain this observation
Date posted:
February 6, 2017
-
The total weight of a car with passengers is 25, 000 N. The area of contact of each of the four tyres with the ground is 0.025m2. Determine the minimum car tyre pressure
Date posted:
February 6, 2017
-
State one advantage of fitting wide tyre on a vehicle that moves on earth roads.
Date posted:
February 6, 2017
-
The height of the mercury column in a barometer at a place is 64 cm. What would be the height of a column of paraffin in barometer at the same place?
(Density of paraffin = 8.0 X 102kgm-3)
Date posted:
February 6, 2017
-
A small nail may pierce an inflated car tyre and remain there without pressure reduction in the tyre. Explain this observation.
Date posted:
February 6, 2017
-
A solid weighs 16.5 N on the surface of the moon. The force of gravity on the moon is 1.7NKg-1. Determine the mass of the solid.
Date posted:
February 6, 2017
-
A steel needle when placed carefully on water can be made to float. When a detergent is added to the water it sinks. Explain this observation
Date posted:
February 6, 2017